Makita Battery Drill Machine HP488DWAE The Makita HP488DWAE Battery Hammer Drill Machine 13mm, is powered by an 18V lithium-ion battery with 2-speed variable control (High 0 ~ 21,000 / Low 0 ~ 6,000) that allows users to match the speed based on the application. Its compact and lightweight design makes it easy to handle and highly maneuverable. In addition, Brake for increased operator safety and avoid accidents, a Reversing feature to quickly remove screws and other fasteners. With 16 clutch settings and a drill mode, users can achieve added fastening control and perform a wide range of drilling tasks. Powerful Features: Lithium Ion Extreme Technology: The LXT System was the world’s first 18V lithium-ion cordless tool system. LXT Products deliver premium power and run time for consistent results in commercial applications. These products are the one-battery solution for contractors that require a cordless tool system to be more provides longer work time for increased performance and productivity to help them solve problems, job after job. It has a charge time of just 45 minutes when using the Makita rapid charger with the added convenience of an LED charge level indicator. The charger communicates with the individual cell in the battery and controls current, voltage, and temperature. Both rapid and optimum charge are achieved making battery life longer. Variable speed: Variable speed control allows the user to match the speed to the application they are working on. Brake: Electronic brake stops the bit in 2 seconds quickly and easily for increased operator safety and avoiding accidents. Reversing: After drilling, setting the bit direction to reverse spins it counterclockwise to help it come out of the hole cleanly and easily. You'll also use reverse mode to quickly remove screws and other fasteners. Mechanical 2-Speed: Mechanical 2 speed gearing selection switch allows the operator to operate at high speed for fast drilling applications and low speed with high torque while drilling large diameter holes. Torque Setting 16: 16 clutch settings and a drill mode for added fastening control and for a wide range of drilling, fastening and hammer drilling applications. Makita Battery Drill Machine Features: Powered exclusively by the 18V G-Series Li-ion battery. Compact and lightweight design. All metal gear construction ensures high transmission durability. Single sleeve keyless chuck enables easy bit installation/removal with one hand. Ergonomically designed rubberized soft grip provides more control and comfort. Makita Battery Drill Machine Accessories: (+)(-) bit. Variable speed control Reverse switch Electric brake 16 Torque settings plus drill mode Keyless Chuck Capacity / Steel: 13 mm (1/2Inch) Capacity / Wood: 36 mm (1 - 7/16Inch) Capacity / Masonry: 13 mm (1/2Inch) Clutch Torque Setting / 1 - 4N·m (9 - 35in.lbs.) Chuck Capacity / 1.5 - 13 mm (1/16 - 1/2Inch) Impacts Per Minute (IPM) / High: 0 - 21,000 Impacts Per Minute (IPM) / Low: 0 - 6,000 No Load Speed (RPM) / High: 0 - 1,400 No Load Speed (RPM) / Low: 0 - 400 Max Fastening Torque / Hard: 42N·m (370 in.lbs) Max Fastening Torque / Soft: 24N·m (210 in.lbs) Max Lock Torque / 38 N·m (340 in.lbs.) Dimensions (L x W x H) / 239 x 83 x 240 mm (9-3/8 x 3-1/4 x 9-1/2Inch)